Banner
Wall-mounted household high-power hot and cold hair dryer wall-mounted hotel hotel hair dryer ABS material X-7724

Wall-mounted household high-power hot and cold hair dryer wall-mounted hotel hotel hair dryer ABS material X-7724

Product Details

wall-mounted hair dryerWall Mounted Hotel Hair Dryer, It can be installed on the wall or in a drawer. It is an essential product for hairdressing and drying in today's star-rated hotels, homes and other places.

installation method:

Note: Please do not install the appliance above the bathtub and washbasin and where there is water dripping.

Open wire installation:

1. Drill 2-Φ6 mounting holes at the installation location, and insert the rubber plugs provided; insert the hooks with mounting screws, and fasten the hooks to the holes above with mounting screws.

2. Insert the mounting bayonet on the back of the rear shell into the hook, and fix the front and rear shells together on the wall with the screws provided, and then insert the screw plugs into the screw holes.

3. Plug in the power supply and turn the main power switch to the "ON" position.

Concealed wire installation

1, press (open wire installation step 1).

2. First loosen the screws fastened to the front case, then remove the front case, and remove the power cord with the plug from the terminal.

3. Knock out the plastic of the cable inlet hole, and pass the reserved power supply through the cable inlet hole. Then insert the mounting bayonet on the back of the rear shell into the hook, and fix the rear shell to the wall with the screws provided.

4. Connect the reserved power line to the original power line terminal (pay attention to the direction of the N and L lines when connecting), and put the terminal in the original position after connecting.

5. After checking, install the front shell on the rear shell and fix it with screws.

6. Plug in the power supply and turn the main power switch to the "ON" position.

Drawer installation:

1. Drill 2-Φ4 mounting holes on the bottom of the drawer.

2. Fix the entire base of the hairdresser with the screws provided under the drawer board.

3. Plug in the power supply and turn the main power switch to the "ON" position.

Brand: Italy

Product name: Wall-mounted hair dryerPower 133\/1600wVoltage: 220v\/50Hz


Current: 5.9A\/7.3AMaterial: ABS engineering plasticPacking Quantity: 20pcs


Packing volume: 523851CM

M-1288格莱特_06
M-1288格莱特_07
M-1288格莱特_08

M-1288格莱特_11
M-1288格莱特_12
M-1288格莱特_13
M-1288格莱特_14
undefined
M-1288格莱特_16

undefined


Inquiry